Your scan is sitting on a hard drive
You paid for the survey. Gigabytes of points still aren't a model your team can use.
We turn E57, RCP and LAS scans into a clean, coordinated Revit model at LOD 200 to 400, accurate to ±6 mm. The deadline is fixed in writing.
Three workflows, three kinds of input, one result: a clean Revit model. Each video runs from the first file to the finished model.
Client project: a residential building — basement, three floors and an attic — modelled in Revit from a laser scan in one day: brick vaults, a timber roof structure, chimney stacks and walls that are never quite straight.
Furnace shop, video 1 of 2: base and pits, columns and crane runways, the deck, two furnaces with hydraulics, pipework and the overhead crane — system by system. Modelled from a laser scan in one day.
Furnace shop, video 2 of 2: one flight through the shop as 6.7 million scan points turn into the Revit model, element by element. 386 elements, done in one day.
Client project: a private villa modelled in Revit from a laser scan in three days — three floors, roofs and the pool, then a flight inside: the hall, the kitchen and the bathrooms, down to every light fitting.
Client project: a 64 × 22 m sports hall modelled in Revit from a laser scan in one day — the steel frame, walls, 79 windows and every hoop, mat and bench.
Client project: a 189 m² brick building under reconstruction modelled in Revit from a laser scan in one day — walls, slabs and the mezzanine, then heating, ductwork and cable trays: 577 elements.
Demo project: a chiller plant scanned from 8 stations, 31 million points, turned into a clean Revit model system by system: chillers, pumps, headers, valves, insulation, supports.
Demo project: a typical school floor, about 1,160 m², built in Revit straight from our own 2D drawing set: 37 walls, 44 columns, 15 doors, 42 windows, 2 stairs and 16 rooms. All 719 drawing objects checked against the model.
Demo project: a fictional manufacturer's ducted fan coil (4 sizes) and plate heat exchanger (3 sizes) modeled from their datasheets as parametric Revit families with duct, pipe and power connectors, then connected in a test project.
You paid for the survey. Gigabytes of points still aren't a model your team can use.
"One more week" turns into a month while architects and MEP wait on existing conditions.
An inaccurate model means RFIs, change orders, rework and blown schedules.
We fix all three. Fixed price. Fixed deadline.
You already paid for the scan. Let's turn it into a model your whole team can build on.
Architecture, structure and MEP at the LOD you specify, in Revit, IFC or DWG.
Every model checked against the cloud, with a deviation report included.
E57, RCP/RCS, LAS, PTS — from any scanner. We handle it.
Revision rounds are part of the price, not an extra invoice.
Your templates, families and BIM Execution Plan — followed to the letter.
Your project data stays with our team. Period.
A clean architectural and structural background your MEP team can start modeling on day one.
A test model fragment up to 500 m² is free, so you can judge the quality before placing the full order.
Revit modeling services for architects, engineers, contractors and surveyors: from a laser scan or a drawing set to a clean, coordinated BIM model.
Laser scans in E57, RCP/RCS, LAS or PTS turned into a Revit model of existing conditions: walls, slabs, columns, beams, roofs, stairs and openings.
Accurate as-built models for renovation, fit-out and facility management — the starting point your design team needs on day one.
2D drawing sets converted into a 3D Revit model, with floor plans, sections and elevations cross-checked against each other.
Pipes, ducts, cable trays, equipment, valves and supports modeled from the point cloud — ready for clash detection.
MEP families with connectors built from your catalogue data at LOD 300: type catalogs, shared parameters, symbolic 2D views, RFA + IFC — ready for your website and the BIM libraries.
From design-stage massing to fabrication-level detail, with your Revit templates, families and BIM Execution Plan.
A dedicated Revit team that scales with your workload — price and deadline fixed in writing before we start.
We work with clients in the USA, Europe, Israel and the CIS. Deliverables: Revit (RVT), IFC and DWG.
The same chiller plant twice: the laser scan and the Revit model we built from it. Drag the slider to swap one for the other, then click any pipe, valve or pump to see the data the model carries.
Demonstration project. The scan was simulated from the finished model: 8 stations, 31 million points; the browser shows 600,000 of them, thinned to a 3 cm grid.
Open a project to watch the build video or flip through the screens with notes on what was done.
A short introduction to our work, company, team and the clients we support.
PeekWire's article about Scan-to-BIM services in the US.
Read the articleTell us the floor area and the scope. A message or the form below is enough.
We review your files and lock in price and deadline in writing.
We build the model and share progress so there are no surprises.
Model plus accuracy report, on time or early.
Fixed rates by scope, LOD and area. Send your point cloud for a firm quote and deadline.
Send a point cloud for a test model fragment up to 500 m². Review the modeling quality before placing the full order.
A quick ballpark in seconds. The final price and date are fixed in writing after we review your files.
We take the risk. All you do is send the scan.
We assess it during the quote and tell you straight what it can and can't support.
E57, RCP/RCS, LAS and PTS from any scanner. For CAD to BIM we work from PDF and DWG drawing sets.
We send you a secure upload link, or you ship us a drive.
A Revit model (RVT), IFC or DWG on request, and a deviation report against the point cloud.
Send your template and BEP. We model to them, not to ours.
We model from your existing point cloud. On site laser scanning is quoted separately.
We sign an NDA on request, and project files stay with our team.
Send a point cloud for a test model fragment up to 500 m². We model that fragment at no cost so you can review the quality before placing the full order.
Compare it to a month of your design team waiting on existing conditions. The quote is free — you lose nothing by asking.
Formats, registration, coverage, what to send with the scan and how to transfer big files. One page that saves days of back-and-forth.
We'll only use your email to send the checklist and answer your questions. No spam.
Tell us about the project. We'll call back with a firm price and delivery date. No obligation.
FreeTest model fragment free — up to 500 m².
By submitting, you agree to our Privacy Policy.
Form not working? Email [email protected], or send your request via Telegram or Google Form.